Products

Screw conveyors

Screw conveyor is a mechanism that uses a rotating screw blade, called flighting, usually within a tube, to move liquid or granular materials. They are used in many bulk handling industries. There are three types of screw conveyors like horizontal screw conveyors, inclined screw conveyors and vertical screw conveyors.

Bucket Elevators

A bucket elevator, also called a grain leg, is a mechanism for hauling flowable bulk materials (most often grain or fertilizer) vertically. A bucket elevator can elevate a variety of bulk materials from light to heavy and from fine to large lumps.

A centrifugal discharge elevator may be vertical or inclined. Vertical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Inclined elevators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don’t depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower.

Belt conveyors

A Belt conveyor system is one of the many types of conveyor systems.  Veengro expert in manufacturing of longest belt conveyors up to 1 km.  There are two main industrial classes of belt conveyors, those are in general material handling  such as those moving boxes along inside a factory and bulk material handling such as those used to transport large volumes of resources and agricultural materials such as grain, salt, coal, ore, sand, coal and more.

Drag chain conveyors

A chain conveyor is a type of conveyor system for moving material through production lines.

Chain conveyors utilize a powered continuous chain arrangement, carrying a series of single pendants. The chain arrangement is driven by a motor, and the material suspended on the pendants are conveyed. Chain conveyors are used for moving products down an assembly line and/or around a manufacturing or warehousing facility.

RAV

Rotary airlock feeders have wide application in industry wherever dry free-flowing powders, granules, crystals, or pellets are used. Typical materials include: cement, ore, sugar, minerals, grains, plastics, dust, fly ash, flour, gypsum, lime, coffee, cereals, pharmaceuticals, etc.

Industries requiring this type include cement, asphalt, chemical, mining, plastics, food, etc.

Rotary feeders are ideal for pollution control applications in wood, grain, food, textile, paper, tobacco, rubber, and paint industries, the Standard Series works beneath dust collectors and cyclone separators even with high temperatures and different pressure differentials.

Rotary valves are available with square or round inlet and outlet flanges. Housing can be fabricated out of sheet material or cast. Common materials are cast iron, carbon steel, 304 SS, 316 SS, and other materials. Rotary airlock feeders are often available in standard and heavy duty models, the difference being the head plate and bearing configuration.

Slide gate valve

A Slide gate valve, also known as a sluice valve, is a valve which opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired.

Veengro manufactures all types of slide gates such manual, motorized and pneumatic.

Diverter Valve

Diverter Gates manufactured by Veengro offer a perfect solution to the diversion of Solid Materials from a single point to two different delivery points regulate the amount of flow to various circuits, and to isolate circuit for maintenance. They are ideal for diverting gravity flow of materials. They can be as basic as a single to double diverter with a manual lever to Change blade position from one side to the other, or they can be fully automated devices capable of controlling flow from one or more sources to various points.

Bag filters

A baghouse (BH, B/H), bag filter (BF) or fabric filter (FF) is an air pollution control device that removes particulates out of air or gas released from commercial processes or combustion for electricity generation.Power plants, steel mills, pharmaceutical producers, food manufacturers, chemical producers and other industrial companies often use baghouses to control emission of air pollutants. Baghouses.

Industrial Fans

A centrifugal fan is a mechanical device for moving air or other gases. The terms “blower” and “squirrel cage fan”, (because it looks like a hamster wheel), are frequently used as synonyms. These fans increase the speed and volume of an air stream with the rotating impellers.

Centrifugal fans use the kinetic energy of the impellers to increase the volume of the air stream, which in turn moves them against the resistance caused by ducts, dampers and other components. Centrifugal fans displace air radially, changing the direction (typically by 90°) of the airflow. They are sturdy, quiet, reliable, and capable of operating over a wide range of conditions.